How many watts is 4000 lumens? 

Lumens To Watts Calculator
Luminous flux (lm) Light source Power (W)
4000 Fluorescent lamp 66.66666667
5000 LED lamp 55.55555556
6000 Metal halide lamp 68.96551724
7000 High-pressure sodium vapor lamp 59.82905983

How many lumens is considered very bright? For those who want to light large areas like a construction site or factory space, then 1000-3000 lumens would be enough. A decade ago, 100-lumen flashlights were considered bright enough for soldiers and police officers. But today, most flashlights go as high as 1000 lumens.

How many square feet will 4000 lumens light? Multiply room square footage by the footcandle requirement. For example, a 100 square-foot living room, which needs 20 footcandles, will need 2,000 lumens. A 100 square-foot dining room, which needs 40 footcandles, will require 4,000 lumens.

How many foot candles is 4000 lumens? To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

How many watts is 4000 lumens? – Additional Questions

How many lumens is a 60 watt bulb?

Lumens measure brightness. For example, a 60-watt incandescent bulb produces about 800 lumens of light.

How many lumens does a 12×12 room need?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

How many lumens is a foot-candle?

One foot-candle equals 10.76 lumens (a lumen is considered the same as lux, which is what most modern light meters calculate their measurements in), so in order to convert your foot-candles to lumens, you will need to take the amount of foot-candles measured and multiply by 10.76 to get the number of lumens.

How many candles equal a lumen?

Candlepower and lumens measure different light qualities, and 1 candlepower equals 12.57 lumens.

How many lumens is 200 000 candlepower?

Insert the candlepower measurement into the following formula: L=C/0.07958, For example, 200 candlepower would equal: L = 200 candlepower / 0.07958. Do the division using a calculator: 200 candlepower / 0.07958 = 2 513 lumens.

How many candlepower are in a lumen?

Divide the lumens rating by 12.57, using your calculator. For example, if your lamp is rated at 12.57 lumens, divide by 12.57 to determine that it has an output of 1 candlepower.

How many lumens is a police spotlight?

A police issue or used light is typically between 300 and 1,200 lumens, and 4,000 to 65,000 candela.

Which is brighter lumens or candlepower?

The short answer about lumens vs. candlepower: Candlepower is a measure of the brightest part of the beam of a flashlight whereas lumens is a measure of the total amount of light put out by a flashlight. A good example demonstrating the difference between lumens and candlepower is the laser.

How many lumens is the sun?

Direct sunlight has a luminous efficacy of about 93 lumens per watt of radiant flux. Multiplying the figure of 1050 watts per square meter by 93 lumens per watt indicates that bright sunlight provides an illuminance of approximately 98 000 lux (lumens per square meter) on a perpendicular surface at sea level.

How many lumens is a car headlight?

On average, 2,000 – 4,000 Lumens is common range for many headlights. However, the output of an LED headlight kit is dependent upon many factors. One of the primary factors is the number or LEDs contained in each bulb.

How many lumens is an iPhone flashlight?

Your iPhone can produce a pretty decent amount of light (roughly 40-50 lumens), but it has a few drawbacks. For instance, it’s not as powerful as a real flashlight, and it drains the phone’s battery.

How many lumens will damage eyes?

Um almost any amount of light shining into your eyeballs will cause damageeven . 5 lumens at poi t plank range.

How many lumens are blinding?

With the flashlight with more than 100 lumens you can blind the attacker for a few minutes. 150-299 lumens. It will be enough to light up a large dark room. At 150 lumens you may blind the attacker at night, but close to 300 lumens you will be able blind the attacker in the daytime.

Is 1000 lumens too bright for home defense?

Self-defense flashlights should have a minimum of 60 lumens, but twice that is a better place to start. This is enough brightness to search a building or temporarily blind an attacker.

How many lumens do you need for self-defense?

At least 120 lumens of light output.

For a flashlight to be an effective self-defense tool, it needs to be bright enough to disorient attackers. Anything less than 120 lumens just won’t get the job done.

How many lumens is a phone flashlight?

The flashlight on your phone is about 40 – 50 lumens. A phone flashlight has a diffused beam, good for illuminating small areas close by. A dedicated flashlight is recommended for most outdoor activities for the brightness, distance, and runtime.

How many lumens is a tactical flashlight?

As I’ve mentioned at the beginning of this article, a tactical flashlight’s light output falls in the range of 300 to 1000 lumens for the typical handheld varieties. The larger size of torch-style tactical flashlights can output even more light, with some models reaching as much as 9000 lumens.

What’s the highest lumens for a flashlight?

The brightest flashlight in the world for 2022 is the 100,000-lumen Imalent MS18 which I own and extensively reviewed here. Basically, it’s an epic hand-held stadium light that can throw a beam down-range 1.3km.